Активное сетевое оборудование
-
Коммутаторы
-
Коммутаторы 10GE
-
Juniper QFX5100-48S-3AFI - Коммутатор, 48 портов 10GBaseFX SFP+ и 6 портов 40G BaseX QSFP
Juniper QFX5100-48S-3AFI - Коммутатор, 48 портов 10GBaseFX SFP+ и 6 портов 40G BaseX QSFP
Отзывов: 0
Артикул:
QFX5100-48S-3AFI
- Бренд: Прочие бренды
- Количество портов 48-52
- Управляемость Управляемый L3
- Гарантия: 12 месяцев (1 год)
- Состояние: Новый
- Возможность поставки: Доступен к заказу
Купить Juniper QFX5100-48S-3AFI - Коммутатор, 48 портов 10GBaseFX SFP+ и 6 портов 40G BaseX QSFP
Доступно для заказа:
0 шт.
Нет в наличии
Удалённый склад: 0 шт.
В пути: 0 шт.
Коммутаторы серии Juniper QFX5000 предназначены для построения сетей центров обработки данных на уровне аггрегации и ядра. Благодаря поддержке выскокой плотности портов 1/10/40 Gbit/s, коммутаторы серии QFX являются идельным решением входящим в универсальную структуру Junos Fusion а так же Virtual Chassiss Fabric.
| Основные особенности |
|
|
|
|
|
|
|
|
Характеристики:
| Производительность | |
| • QFX5100-48S: 1.44 Tbps/1.08 Bpps | |
| • QFX5100-48T: 1.44 Tbps/1.08 Bpps | |
| • QFX5100-24Q: 2.56 Tbps/1.44 Bpps | |
| • QFX5100-24Q-AA: 2.56 Tbps/1.44. Bpps | |
| • QFX5100-96S: 2.56 Tbps/1.44 Bpps | |
| Вес | |
| • QFX5100-48S: | (9.9 kg) |
| • QFX5100-48T: | (11.2 kg) |
| • QFX5100-24Q: | (9.8 kg) |
| • QFX5100-24Q-AA: | (9.8 kg) |
| • QFX5100-96S: | (14.74 kg) |
| Размеры (HxWxD) | |
| • QFX5100-48S: | (4.37 x 44.09 x 52.02 cm) |
| • QFX5100-48T: | (4.37 x 44.09 x 54.54 cm) |
| • QFX5100-24Q: | (4.37 x 44.09 x 52.02 cm) |
| • QFX5100-24Q-AA: | (4.37 x 44.09 x52.02 cm) |
| • QFX5100-96S: | (8.8 x 44.09 x 57 cm) |
| Switching mode: Cut-through and store-and-forward | |
| Front-to-back or back-to-front airflow (for hot aisle/cold aisle deployment) | |
| Management and rear console port connections | |
| Энергопотребление | |
| • QFX5100-48S-AFO/AFI: | 150 W |
| • QFX5100-48T-AFO/AFI: | 335 W |
| • QFX5100-24Q-AFO/AFI: | 161 W |
| • QFX5100-24Q-AA-AFO/AFI: | 175 W |
| • QFX5100-96S-AFO/AFI: | 263 W |
| Интерфейсы | |
| • QFX5100-48S-AFO/AFI: |
1GbE SFP: 48 (24 copper 1GbE) 10GbE SFP+: 48/72 (with breakout cable) 40GbE QSFP+: 6 |
| • QFX5100-48T-AFO/AFI: |
100 Mbps RJ-45: 48 1GbE RJ-45: 48 10GbE RJ-45: 48 10GbE SFP+: 24 (with breakout cable) 40GbE QSFP+: 6 |
| • QFX5100-24Q-AFO/AFI: |
100 Mbps RJ-45: 48 1GbE RJ-45: 48 10GbE RJ-45: 48 10GbE SFP+: 24 (with breakout cable) 40GbE QSFP+: 6 |
| • QFX5100-24Q-AA-AFO/AFI: |
100 Mbps RJ-45: 48 1GbE RJ-45: 48 10GbE RJ-45: 48 10GbE SFP+: 24 (with breakout cable) 40GbE QSFP+: 6 |
| • QFX5100-96S-AFO/AFI: |
1GbE SFP: 96 (48 Copper 1GbE) 10GbE SFP+: 104 (with breakout cable) 40GbE QSFP+: 8 |
| • Each QSFP+ port can be configured as a 4 x 10GbE interface | |
| • Each QSFP+ port can be configured as a 40 Gbps port | |
| • USB port | |
| • Console port | |
| • 2 management ports: 1 RJ-45 and 1 SFP | |
| Поддерживаемые типы интерфейсов | |
| • SFP+ 10GbE optical modules | |
| • SFP+ DAC cables: 1/3/5 m twinax copper and 1/3/5/7/10 m active twinax copper | |
| • SFP GbE optical and copper module | |
| • QSFP+ to SFP+ 10GbE direct attach break-out copper (1/3 m twinax copper cable) | |
| Охлаждение | |
| • Front-to-back and back-to-front cooling | |
| • Redundant variable-speed fans to reduce power draw | |
| Блоки питания и вентиляторы | |
| • Dual redundant (1+1) and hot-pluggable power supplies | |
| • 110-240 V single phase AC power | |
| • -36 to -72 V DC power | |
| • Redundant (N+1) and hot-pluggable fan modules for frontto-back and back-to-front airflow | |
| Производительность | |
| • MAC addresses per system: 288,000 | |
| • VLAN IDs: 4,096 | |
| • Number of link aggregation groups (LAGs): 128 | |
| • Number of ports per LAG: 32 | |
| • Number of FCoE VLANs/FC Virtual Fabrics: 4,095 | |
| • Firewall filters: 4000 | |
| • IPv4 unicast routes: 128,000 prefixes; 208,000 host routes; 644 ECMP paths | |
| • IPv4 multicast routes: 104,000 | |
| • IPv6 multicast routes: 52,000 | |
| • IPv6 unicast routes: 64,000 prefixes | |
| • ARP entries: 48,000 | |
| • Jumbo frame: 9,216 bytes | |
| • Spanning Tree Protocol (STP) |
Multiple Spanning Tree Protocol (MSTP) instances: 64 VLAN Spanning Tree Protocol (VSTP) instances: 253 |
| • Traffic mirroring |
Mirroring destination ports per switch: 4 Maximum number of mirroring sessions: 4 Mirroring destination VLANs per switch: 4 |
| Фунционал второго уровня | |
| • STP—IEEE 802.1D (802.1D-2004) | |
| • Rapid Spanning Tree Protocol (RSTP) (IEEE 802.1w); MSTP(IEEE 802.1s) | |
| • Bridge protocol data unit (BPDU) protect | |
| • Loop protect | |
| • Root protect | |
| • RSTP and VSTP running concurrently | |
| • VLAN—IEEE 802.1Q VLAN trunking | |
| • Routed VLAN Interface (RVI) | |
| • Port-based VLAN | |
| • MAC address filtering | |
| • Private VLAN (PVLAN)* | |
| • QinQ* | |
| VLAN Translation | |
| • Static MAC address assignment for interface | |
| • Per VLAN MAC learning (limit) | |
| • MAC learning disable | |
| • Link Aggregation and Link Aggregation Control Protocol (LACP) (IEEE 802.3ad) | |
| • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) | |
| Link Aggregation | |
| • Multi-chassis link aggregation (MC-LAG) | |
| • Redundant Trunk Group (RTG) | |
| • LAG load sharing algorithm—bridged or routed (unicast or multicast) traffic: | |
| IP: SIP, Dynamic Internet Protocol (DIP), TCP/UDP source port, TCP/UDP destination port | |
| Функционал третьего уровня | |
| • Static routing | |
| • Routing policy | |
| • Routing protocols (RIP, OSPF, IS-IS, BGP) | |
| • Virtual Router Redundancy Protocol (VRRP) | |
| • Bidirectional Forwarding Detection (BFD) protocol | |
| • Virtual router | |
| • Dynamic Host Configuration Protocol (DHCP) relay | |
| • Proxy Address Resolution Protocol (ARP) | |
| Multicast | |
| • Internet Group Management Protocol (IGMP): v1, v2 , V3 | |
| • IGMP snooping: v1, v2, v3 | |
| • IGMP Filter | |
| • PIM-SM | |
| • Multicast Source Discovery Protocol (MSDP) | |
| Функционал безопасности | |
| • Secure interface login and password | |
| • RADIUS | |
| • TACACS+ | |
| • Ingress and egress filters: Allow and deny, port filters, VLAN filters, and routed filters, including management port filters | |
| • Filter actions: Logging, system logging, reject, mirror to an interface, counters, assign forwarding class, permit, drop,police, mark | |
| • SSH v1, v2 | |
| • Static ARP support | |
| • Storm control, port error disable, and autorecovery | |
| • Control plane denial-of-service (DoS) protection | |
| • IP Source Guard | |
| • Dynamic ARP Inspection (DAI) | |
| • Sticky MAC address | |
| • DHCP snooping | |
| Качетсво обслуживания | |
| • L2 and L3 QoS: Classification, rewrite, queuing | |
| • Rate limiting: |
Ingress policing: 1 rate 2 color, 2 rate 3 color Egress policing: Policer, policer mark down action Egress shaping: per queue on each port |
| • 12 hardware queues per port (8 unicast and 4 multicast) | |
| • Strict priority queuing (LLQ), smoothed deficit weighted round-robin (SDWRR), weighted random early detection (WRED), weighted tail drop | |
| • 802.1p remarking | |
| • Layer 2 classification criteria: Interface, MAC address, Ethertype, 802.1p, VLAN | |
| • Congestion avoidance capabilities: WRED | |
| • Trust IEEE 802.1p (ingress) | |
| • Remarking of bridged packets | |
| Virtual Chassis* | |
| • 40GbE and 10GbE as Virtual Chassis port | |
| • Virtual Chassis Routing Engine (RE) election | |
| • Virtual Chassis pre-provisioning (plug and play) | |
| • Auto-LAG formation of Virtual Chassis ports | |
| • Mixed Virtual Chassis support | |
| • FCoE transit across Virtual Chassis members | |
| • QoS on Virtual Chassis ports | |
| • Local Designated Forwarding | |
| • Unified ISSU | |
| • Graceful RE switchover (GRES) | |
| • Nonstop routing (NSR) | |
| • Nonstop bridging (NSB) | |
| • Monitor distributed aggregate interface | |
| • Control plane protection for virtual RE | |
| High Availability | |
| • Topology-independent in-service software upgrade (TISSU) | |
| • Bidirectional Forwarding Detection (BFD) | |
| • Uplink failure detection (UFD) | |
| MPLS | |
| • Static label-switched paths (LSPs) | |
| • RSVP-based signaling of LSPs | |
| • LDP-based signaling of LSPs | |
| • LDP tunneling (LDP over RSVP) | |
| • MPLS class of service (CoS) | |
| • MPLS access control list (ACL)/policers | |
| • MPLS LSR support | |
| • IPv6 tunneling (6PE) (via IPv4 MPLS backbone) | |
| • MPLS Operation, Administration, and Maintenance (OAM)—LSP ping | |
| • IPv4 L3 VPN (RFC 2547, 4364) | |
| Функционал управления | |
| • Junos Space Network Director* | |
| • Role-based CLI management and access | |
| • CLI via console, telnet, or SSH | |
| • Extended ping and traceroute | |
| • Junos OS configuration rescue and rollback | |
| • Image rollback | |
| • SNMP v1/v2/v3 | |
| • Junos XML management protocol | |
| • sFlow v5 | |
| • Junos OS event, commit, and OP scripts | |
| Зеркалирование траффика | |
| • Port-based | |
| • LAG port | |
| • VLAN-based | |
| • Filter-based | |
| • Mirror to local | |
| • Mirror to remote destinations (L2 over VLAN) | |
Витраульные фабрики Juniper - универсальное решение для построения центров обработки данных, которое обеспечивает быструю и легкую масштабируемость, универсальное управление, выскую скорость передачи данных.
29-07-2019
Показать еще...